Wheel Base
106
Frame
Length 148
Width
43-1/2
Wheel
Mounting Width (Front & Rear) 56
Weight As
Pictured 640 lbs.
Independent
Front Suspension:
Double A-Arm
Independent, Billet Adjustable Coil-Over Shocks,
Rack &
Pinion Steering, Anti Sway Bar, .875 Vented Disc Front Brakes.
Dropped Axle
Front Suspension:
Tube Axle,
Mono Leaf Spring, Equal Length Parallel Bars,
Tube Shocks,
Cross Steering, 1 Vented Disc Front Brakes.
Rear
Suspension:
Ford 9 3.00
to 4.11 Open Gear, Equal Length Parallel Bars,
Coil-Over
Shocks, 11 Drum Rear Brakes.
Our
attention to detail when designing our new 32 rails has resulted
in a laser cut reproduction rail with a die stamped full length
reveal based on the original Ford design. The re-designed
X-member will allow for 2-1/2 exhaust system clearance through
the center section for improved ground clearance. This new
X-member is used for stock bodies with flat floors and fiberglass
bodied cars only. Using a floor other than flatrequires the use
of the K-member center section. Available with 1 dropped Model
A style front crossmember or an IFS crossmember and your choice
of one of the three different rear crossmembers: Coil-Over is
standard, Corvette, or Jag optional. Specify full fendered or hi
boy. For the 28-29 Model A bodies, on 32 rails, we offer a
special contoured rail to follow the body line in the cowl area.
1932 Ford
Chassis 
