Engine pulleys from Charlotte Rod

Billet Water Pump Pulleys

The benefit of a billet aluminum pulley over a cast pulley is equal density. With a cast pulley, the aluminum is poured into a mold and then allowed to cool. This process can create variations in density throughout the pulley. Dense areas are heavier than the more porous areas causing the pulley to vibrate at high RPM. Our billet pulleys are equally dense throughout; equal weight translates to a true and balanced pulley drive system.

Water Pump Pulleys
Machined from 6061-T6 billet aluminum for incredible balance and strength. Available for small and big block Chevy™ motors with long or short water pumps. Billet pulley nose cones available, sold separately.

Long Water Pump Applications Small/Big Block Chevrolet
1-Groove 78110 $69.95	Nose Cone 84220 $15.95
2-Groove 78120 $69.95

Short Water Pump Applications Small Block Chevrolet
1-Groove 80120 $74.95	Replacement Bolts RP8020 $3.95
2-Groove 80220 $74.95

Short Water Pump Applications Big Block Chevrolet
1-Groove 82120 $74.95	Nose Cone 84120 $15.95
2-Groove 82220 $74.95	Replacement Bolts RP8020 $3.95

Billet Crankshaft Pulleys

Crankshaft Pulleys
Our crankshaft pulleys are machined from 6061-T6 billet aluminum and polished to a mirror finish. Available for small and big block Chevy™ applications, with either a long or short water pump. Pulleys are 6-7/16” diameter.

Short Water Pump Applications Small Block - Chevrolet
1-Groove 81120 $59.95	3-Groove 81320 $69.95
2-Groove 81220 $64.95

Big Block - Chevrolet
1-Groove 83120 $59.95	3-Groove 83320 $69.95
2-Groove 83220 $64.95

Long Water Pump Applications Small Block - Chevrolet
1-Groove 78210 $64.95	3-Groove 78230 $69.95
2-Groove 78220 $64.95

Big Block - Chevrolet
1-Groove 79210 $64.95	3-Groove 79230 $69.95
2-Groove 79220 $64.95

Billet Alternator Pulleys

Machined in the USA from 6061-T6 billet aluminum this Billet Specialties one piece alternator pulley features a bolt on nose cone to hide the alternator nut and washer. We also offer the industries only one piece alternator pulley with fan!

Pulley Only

85120

$26.95

Pulley with Fan

85220

$54.95

A/C Clutch Cover

Engineered as a direct bolt-ons for the Sanden SD-7 & Sanden 508 compressors and machined from solid aluminum these covers attach with the supplied stainless hardware and are polished to a mirror finish.

Sanden 508

87120

$39.95

Sanden SD-7

87220

$39.95

Power Steering Pulleys

Machined from 6061-T6 billet aluminum and polished to a mirror finish these power steering pulleys are designed to work with Saginaw power steering pumps with a built-in reservoir. Available in either 1/8” keyway or press-on shaft styles. Keyway pulley works with both long or short water pump applications. Press-on pulleys are for long water pumps only.

Key-Way
1-Groove 86120 $59.95	2-Groove 86220 $64.95

Press-On
1-Groove 86420 $59.95	2-Groove 86520 $64.95

Power Steering Pump

Compliment your bracket and pulley kit with this high quality power steering pump.

Product features:

· Flow rate: 3 GPM

· Pressure: 1100 PSI

· Cad plated AN fittings pre-installed

· Brand new pump (not remanufactured)

Power Steering Pump

12020

$179.95

2GPM Flow Control Valve

The GM style power steering pump exceeds recommended “flow” for a Ford rack resulting in quick turning and a “twitchy” feel while turning. This flow control valve will correctly reduce flow to the OEM spec of 2GPM.

2GPM Flow Control Valve

RP1300

$24.95

Remote Power Steering Reservoir with Brackets

This is the best set-up available. In your choice of Smooth or Ribbed styles, our remote power steering reservoirs are much more than empty cans. The double O-ring sealed breathable cap relieves positive and negative pressure while keeping your engine compartment clean. Forget foaming and fluid turbulence with our innovative internal return tube.

Our exclusive bracket design clamps to the reservoir with an internal lock. The mounting hardware is completely hidden! Includes male AN fittings on the bottom of the reservoir.

Smooth Reservoir 77910 $144.95	8AN Power Steering Supply Fitting RP7701 $9.95
Ribbed Reservoir 77920 $144.95

Power Steering Bracket & Pulley

Engineered to work with GM type II remote power steering pumps. Billet Specialties power steering bracket and pulley is precision machined from 6061-T6 billet aluminum and mounts low on the driver’s side of the motor. Check for clearance before ordering.

Small Block Dimensions - 11 Inch
Short Water Pump Application 12120 $156.95	Long Water Pump Application 12220 $156.95

Big Block Dimensions - 10.75 Inch
Short Water Pump Application 12320 $156.95

Serpentine Pulley Kits

Precision machined & polished to a mirror finish these pulleys are engineered to work with our accessory brackets. 6061-T6 construction means they are perfectly balanced unlike cast pulleys on the market. Stainless steel hardware is included.

Machined in the USA, Billet Specialties serpentine pulley kits are engineered for Chevrolet® motors running a long water pump.
Includes:
- Alternator pulley with Fan & Nose Cone
- Water Pump Pulley with Nose Cone
- Crank Pulley
- Stainless Hardware Included